成交量的問題　[博易POBO]

咨詢內容： 成交量的問題 請問成交量最低位不是從0開始的嗎？.以前的成交量畫線指標變形，現在成交量畫線怎么才能實現？

?

?來源:程序化99網（ www.tumamayizhan.com ）

博易技術人員： 您好，沒看懂您的描述，以下為成交量函數
?
VOL
取當前周期成交量。 請幫我改一下，VOLUME:VOL,VOLSTICK;

綠低量:=10;
藍低量:=50;
灰低量:=100;

{MAV10:MA(V,10),COLORYELLOW;}
異動60:=MA(V,60),COLORMAGENTA,NODRAW;
洗盤40:=MA(V,40),COLORBLUE,NODRAW;
啟動5:=MA(V,5),COLORWHITE,NODRAW;

量對比:V/REF(V,1),COLORFF00FF,LINETHICK0;


換手:VOL*10000/FINANCE(7),NODRAW,COLORGREEN;{DYNAINFO(37)*100}

量比:V/REF(MA(V,5),1),COLOR8000FF,LINETHICK0;
幾倍:V/REF(V,1),COLORYELLOW,LINETHICK0;
倍數:=1.9;
倍量:VOL>=REF(V,1)*倍數AND(IF(C<O,C>REF(C,1),1)),COLORYELLOW,LINETHICK0;
倍縮:REF(V,1)>=VOL*倍數,COLORMAGENTA,LINETHICK0;
平量:RANGE(V/REF(V,1),0.97,1.03)ANDBARSCOUNT(V)>=2,COLORWHITE,LINETHICK0;
低量10:VOL=LLV(VOL,綠低量)ANDBARSCOUNT(V)>=綠低量,COLORGREEN,LINETHICK0;
低量50:VOL=LLV(VOL,藍低量)ANDBARSCOUNT(V)>=藍低量,COLORBLUE,LINETHICK0;
地量:VOL=LLV(VOL,灰低量)ANDBARSCOUNT(V)>=灰低量,COLOR00FF00,LINETHICK0;
{梯量柱}梯增:V>REF(V,1)ANDREF(V,1)>REF(V,2),COLOR0000FF,LINETHICK0;
?{STICKLINE(梯增,0,V,1,0),COLOR404080;}
梯縮:COUNT(VOL<=REF(VOL,1)*0.91,3)=3ANDDYNAINFO(10)>0,COLORFF8000;?
{STICKLINE(梯縮,0,V,2,0),COLORFF80FF;}

V1:=VOL*0.95;{圖標位置}
V2:=VOL*0.85;
STICKLINE(倍量,0,V1,7,0),COLORYELLOW,ALIGN(2);
STICKLINE(平量,0,V1,7,0),COLORWHITE,ALIGN(2);
STICKLINE(低量10,0,V2,7,0),COLOR00FF00,ALIGN(2);
STICKLINE(低量50,0,V2,7,0),COLORBLUE,ALIGN(2);
STICKLINE(地量,0,V2,7,0),COLORGRAY,ALIGN(2);
STICKLINE(倍縮,0,V*0.45,7,0),COLORMAGENTA,ALIGN(2);
STICKLINE(C<OANDC>REF(C,1),0,V1,4,0),COLORRED,ALIGN(2);{假陰柱}


三一:V*0.66,NODRAW;
二一:V*0.5,NODRAW;
STICKLINE(V>REFX(V,1)ANDC<REF(C,1),三一,三一,6,0),COLORBLUE;
STICKLINE(V>REFX(V,1)ANDC<REF(C,1),二一,二一,6,0),COLORBLUE;
STICKLINE(V>REFX(V,1)ANDC>=REF(C,1),三一,三一,6,0),COLORWHITE;
STICKLINE(V>REFX(V,1)ANDC>=REF(C,1),二一,二一,6,0),COLORWHITE; 來源 程序化久久網