打印本文
關閉窗口
該指標包含多個技術指標運算，主要用于判斷市場進出點和運用背離指標進行交易。
具體運算方法如下：
根據收盤價與前兩天的收盤價的大小關系，計算出連續的漲、跌拐點，即cxh1-cxh18；
計算出底部背離條件，當最近一次底部拐點之后的價格低于前一個底部拐點和MACD的DIFF指標低于前一個DIFF拐點時，出現底部背離；
計算出頂部背離條件，當最近一次頂部拐點之后的價格高于前一個頂部拐點和MACD的DIFF指標高于前一個DIFF拐點時，出現頂部背離；
計算出RSV、KDJ等指標，提供市場進出點；
通過壓力位和支撐位，尋找交易的進出點；
通過底部和頂部背離指標，提示交易信號。
操作建議：
根據市場走勢，選擇合適的進出點，尤其需要重視壓力位、支撐位和頂部背離等信號；
根據底部和頂部背離指標，結合其他指標，確定買賣點，可以適當地增加持倉；
注意風險控制，確保止損和止盈策略的制定；
結合其他市場信息，例如大盤走勢等，進行綜合考慮和分析，以減少操作帶來的
?
?
?
?
cxh1:=CLOSE>REF(CLOSE,1) AND CLOSE>REF(CLOSE,2);cxh2:=REF(cxh1,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2);cxh3:=REF(cxh2,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2);cxh4:=REF(cxh3,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2);cxh5:=REF(cxh4,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2);cxh6:=REF(cxh5,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2);cxh7:=REF(cxh6,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2);cxh8:=REF(cxh7,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2);cxh9:=REF(cxh8,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2);cxhA:=REF(cxh9,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2);cxhB:=REF(cxhA,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2);cxhC:=REF(cxhB,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2);STICKLINE(cxh1 OR cxh2 OR cxh3 OR cxh4 OR cxh5 OR cxh6 OR cxh7 OR cxh8 OR cxh9 OR cxhA OR cxhB OR cxhC,CLOSE,REF(CLOSE,1),3,0),COLORRED;cxhD:=CLOSE<REF(CLOSE,1) AND CLOSE<REF(CLOSE,2);cxhE:=REF(cxhD,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2);cxhF:=REF(cxhE,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2);cxh10:=REF(cxhF,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2);cxh11:=REF(cxh10,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2);cxh12:=REF(cxh11,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2);cxh13:=REF(cxh12,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2);cxh14:=REF(cxh13,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2);cxh15:=REF(cxh14,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2);cxh16:=REF(cxh15,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2);cxh17:=REF(cxh16,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2);cxh18:=REF(cxh17,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2);STICKLINE(cxhD OR cxhE OR cxhF OR cxh10 OR cxh11 OR cxh12 OR cxh13 OR cxh14 OR cxh15 OR cxh16 OR cxh17 OR cxh18,CLOSE,REF(CLOSE,1),3,0),COLORYELLOW;cxh19:=REF(cxhD OR cxhE OR cxhF OR cxh10 OR cxh11 OR cxh12 OR cxh13 OR cxh14 OR cxh15 OR cxh16 OR cxh17 OR cxh18,1) AND cxh1;STICKLINE(cxh19,REF(CLOSE,1),REF(CLOSE,2),3,0),COLORMAGENTA;cxh1A:=REF(cxh1 OR cxh2 OR cxh3 OR cxh4 OR cxh5 OR cxh6 OR cxh7 OR cxh8 OR cxh9 OR cxhA OR cxhB OR cxhC,1) AND cxhD;STICKLINE(cxh1A,REF(CLOSE,1),REF(CLOSE,2),3,0),COLOR008800;RSV:=(CLOSE-LLV(LOW,13))/(HHV(HIGH,13)-LLV(LOW,13))*100;K:=SMA(RSV,3,1);D:=SMA(K,3,1);J:=3*K-2*D;RSV24:=(CLOSE-LLV(LOW,55))/(HHV(HIGH,55)-LLV(LOW,55))*100;K24:=SMA(RSV24,3,1);D24:=SMA(K24,3,1);J24:=3*K24-2*D24;壓力位:IF(CROSS(J24,J),H,REF(H,BARSLAST(CROSS(J24,J)))),COLOR00FF33,LINETHICK1;支撐位:IF(CROSS(J,J24),L,REF(L,BARSLAST(CROSS(J,J24)))),COLORCC33CC,LINETHICK1;支撐價:LLV(LOW,23) ,COLOR7FFF00,LINETHICK2;阻力價:HHV(HIGH,23),COLORFF9900, LINETHICK2;A1:=BARSLAST(REF(CROSS("MACD.DIF","MACD.DEA"),1));DRAWTEXT(REF(C,A1+1)>C AND REF("MACD.DIF",A1+1)<"MACD.DIF" AND CROSS("MACD.DIF","MACD.DEA")>0,L-0.02,3),COLOR00FFFF;{MACD底背離}A2:=BARSLAST(REF(CROSS("KDJ.K","KDJ.D"),1));DRAWTEXT(REF(C,A2+1)>C AND REF("KDJ.K",A2+1)<"KDJ.K" AND CROSS("KDJ.K","KDJ.D"),L-0.10,4),COLORFF00FF;{KDJ底背離}A3:=BARSLAST(REF(CROSS("RSI.RSI1","RSI.RSI2"),1));DRAWTEXT(REF(C,A3+1)>C AND REF("RSI.RSI1",A3+1)<"RSI.RSI1" AND CROSS("RSI.RSI1","RSI.RSI2")>0,L-0.18,5),COLOR0000FF;{RSI底背離};C1:=BARSLAST(REF(CROSS("MACD.DEA","MACD.DIF"),1));DRAWTEXT(REF(C,C1+1)<C AND REF("MACD.DIF",C1+1)>"MACD.DIF" AND CROSS("MACD.DEA","MACD.DIF")>0,H+0.16,3),COLOR00FF00;{MACD頂背離};C2:=BARSLAST(REF(CROSS("KDJ.D","KDJ.K"),1));DRAWTEXT(REF(C,C2+1)<C AND REF("KDJ.K",C2+1)>"KDJ.K" AND CROSS("KDJ.D","KDJ.K")>0,H+0.08,4),COLORFFFFCC;{KDJ頂背離}C3:=BARSLAST(REF(CROSS("RSI.RSI2","RSI.RSI1"),1));DRAWTEXT(REF(C,C3+1)<C AND REF("RSI.RSI1",C3+1)>"RSI.RSI1" AND CROSS("RSI.RSI2","RSI.RSI1")>0,H+0.04,5),COLORFF9900;{RSI頂背離};
?
公式導入教程: 【通達信公式源碼導入方法教程】 【同花順公式源碼導入方法教程】 【大智慧新一代公式源碼導入方法教程】
?