咨詢內容：

背離畫線

如圖 出現背離后 在當下死叉點和上一個死叉點? 畫一個連接線? 老師幫忙寫一下 <!-- 咨詢內容：

附件 :

-->

?

?來源:程序化99網（ www.tumamayizhan.com ）

博易技術人員： 您好，論壇不支持看圖或者文字描述寫指標的客服工作。 我只需要綠色畫線函數怎么寫就行??寫不出來當然得畫圖表示才能說清楚啊?不然自己都知道怎么寫就不需要問了
?
DIFF:EMA(DCLOSE,12)-EMA(DCLOSE,26);
DEA:EMA(DIFF,9),COLORFFFF00;
MACD:(DIFF-DEA)*2;

STICKLINE(MACD>=0ANDMACD>=REF(MACD,1),0,MACD,1,0),COLORRED;
STICKLINE(MACD>=0ANDMACD<=REF(MACD,1),0,MACD,1,0),COLORGREEN;
STICKLINE(MACD<=0ANDMACD>=REF(MACD,1),0,MACD,1,0),COLORFF00FF;
STICKLINE(MACD<=0ANDMACD<=REF(MACD,1),0,MACD,1,0),COLOR00FFFF;

多轉空:=((((LLV(MACD,4)>0)AND(MACD<REF(MACD,1)))AND(REF(MACD,1)>REF(MACD,2)))AND(REF(MACD,2)>REF(MACD,3)));
空轉多:=((((HHV(MACD,4)<0)AND(MACD>REF(MACD,1)))AND(REF(MACD,1)<REF(MACD,2)))AND(REF(MACD,2)<REF(MACD,3)));
DRAWICON(多轉空,MACD,2);
DRAWICON(空轉多,MACD,1);
低位金叉:=CROSS(DIFF,DEA)ANDDIFF<-0.1;
DRAWTEXT(低位金叉,DEA,'??低位金叉'),COLORFF00FF;
{STICKLINE(低位金叉,0,0.3,8,0),COLORYELLOW;
DRAWICON(低位金叉,0.3,1)};
JCCOUNT:=COUNT(CROSS(DIFF,DEA),BARSLAST(DEA>=0));
二次金叉:=CROSS(DIFF,DEA)ANDDEA<0ANDCOUNT(JCCOUNT=2,21)=1;
STICKLINE(二次金叉,0,0.2,2,0),COLORFF00FF;
DRAWTEXT(二次金叉,DEA*1.06,'二次金叉'),COLORRED;
A1:=BARSLAST(REF(CROSS(DIFF,DEA),1));
底背離:=REF(CLOSE,A1+1)>CLOSEANDDIFF>REF(DIFF,A1+1)ANDCROSS(DIFF,DEA);
{STICKLINE(底背離,0.5,0.8,2,0),COLORRED};
DRAWLINE(A1=0,DEA,底背離,DEA,0),COLORRED,LINETHICK3;
A2:=BARSLAST(REF(CROSS(DEA,DIFF),1));
頂背離:=REF(CLOSE,A2+1)<CLOSEANDREF(DIFF,A2+1)>DIFFANDCROSS(DEA,DIFF);
DRAWLINE(A2=0,DEA,頂背離,DEA,0),COLORBLUE,LINETHICK3;
?
?
這個代碼的最后的畫線部分怎么改成博易能用的
? 來源 程序化久久網