咨詢內(nèi)容：

請麻煩老師改一下指標謝謝用在博易大師上

短高H:=(20*H+19*REF(H,1)+18*REF(H,2)+17*REF(H,3)+16*REF(H,4)+15*REF(H,5)+14*REF(H,6)
+13*REF(H,7)+12*REF(H,8)+11*REF(H,9)+10*REF(H,10)+9*REF(H,11)+8*REF(H,12)
+7*REF(H,13)+6*REF(H,14)+5*REF(H,15)+4*REF(H,16)+3*REF(H,17)+2*REF(H,18)+
REF(H,20))/210,COLORBLUE,LINETHICK1;
短低L:=(20*L+19*REF(L,1)+18*REF(L,2)+17*REF(L,3)+16*REF(L,4)+15*REF(L,5)+14*REF(L,6)
+13*REF(L,7)+12*REF(L,8)+11*REF(L,9)+10*REF(L,10)+9*REF(L,11)+8*REF(L,12)
+7*REF(L,13)+6*REF(L,14)+5*REF(L,15)+4*REF(L,16)+3*REF(L,17)+2*REF(L,18)+
REF(L,20))/210,COLORBLUE,LINETHICK1;
D90H:=EMA(短高H,90),COLORRED,LINETHICK1;
D90L:=EMA(短低L,90),COLORRED,LINETHICK1;
D90差:=D90H-D90L;
D90頂:=D90H+D90差*2,COLORRED,LINETHICK1;
D90底:=D90L-D90差*2,COLORRED,LINETHICK1;
//XMA(X,N)=REFX(MA(X,N),N/2);
XH25:=REFX1(MA(H,25),25/2);
XXH25:=REFX1(MA(XH25,25),25/2);
XL25:=REFX1(MA(L,25),25/2);
XXL25:=REFX1(MA(XL25,25),25/2);
高0:=(XXH25-XXL25+XXH25),LINETHICK1,COLORWHITE;
低0:=XXL25*2-XXH25,LINETHICK1,COLORWHITE;
多頭定位:=低0>=D90底 AND 高0>=D90頂;
空頭定位:=高0<=D90頂 AND 低0<=D90底;
震蕩定位:=低0>=D90底 AND 高0<=D90頂;
XH60:=REFX1(MA(H,60),60/2);
XXH60:=REFX1(MA(XH60,60),60/2);
XL60:=REFX1(MA(L,60),60/2);
XXL60:=REFX1(MA(XL60,60),60/2);
波段頂0:=4*XXH60-3*XXL60,LINETHICK2,COLORGREEN;
波段底0:=4*XXL60-3*XXH60,LINETHICK2,COLORGREEN;
STICKLINE1(多頭定位=1,高0,低0,5,0),COLOR000066;
STICKLINE1(空頭定位=1,高0,低0,5,0),COLOR003300;
STICKLINE1(震蕩定位=1,高0,低0,5,0),COLOR555555;
STICKLINE1(1=1,D90H,D90L,5,0),COLORGRAY;
多止損:XXL25-(XXH25-XXL25)*3.5,DOT,COLORGREEN;
多止盈:(XXH25-XXL25)*1+XXH25,NODRAW,COLORWHITE;
空止損:(XXH25-XXL25)*3.5+XXH25,DOT,COLORRED;
空止盈:XXL25-(XXH25-XXL25)*0.5,NODRAW,COLORWHITE;
做空:(XXH25-XXL25)*1+XXH25,LINETHICK1,COLORWHITE;
做多:XXL25-(XXH25-XXL25)*1,LINETHICK1,COLORWHITE;
空損:=(XXH25-XXL25)*3.9+XXH25,LINETHICK1,COLORYELLOW;
多損:=XXL25-(XXH25-XXL25)*3.9,LINETHICK1,COLORYELLOW;
波段頂:=(XXH60-XXL60)*3+XXH60,LINETHICK1,COLORRED;
波段底:=XXL60-(XXH60-XXL60)*3,LINETHICK1,COLORGREEN;
DRAWTEXT(ISLASTBAR,做空,'空'),COLORWHITE;
DRAWTEXT(ISLASTBAR,做多,'多'),COLORWHITE;
DRAWTEXT(ISLASTBAR,空損,'損'),COLORRED;
DRAWTEXT(ISLASTBAR,多損,'損'),COLORGREEN;

RSV:=(CLOSE-LLV(LOW,9))/(HHV(HIGH,9)-LLV(LOW,9))*100;
K:=SMA(RSV,3,1);
D:=SMA(K,3,1);
J:=3*K-2*D;
今D:=EMA(D,3);
昨D:=REF(今D,1);
STICKLINE1(今D>=昨D,LOW,MIN(C,O),0.1,0),COLORRED;?
STICKLINE1(今D>=昨D,MAX(C,O),HIGH,0.1,0),COLORRED;?
STICKLINE1(今D>=昨D,CLOSE,OPEN,3,1),COLORRED;
STICKLINE1(今D<=昨D,LOW,MIN(C,O),0.1,1),COLORGREEN;?
STICKLINE1(今D<=昨D,MAX(C,O),HIGH,0.1,1),COLORGREEN;
STICKLINE1(今D<=昨D,CLOSE,OPEN,3,1),COLORGREEN;
//多線:=DRAWLINE(HIGH>=HHV(HIGH,12),HIGH,LOW<=LLV(LOW,12),HHV(HIGH,2),1),LINETHICK2,COLORMAGENTA;
//空線:=DRAWLINE(LOW<=LLV(LOW,12),LOW,HIGH>=HHV(HIGH,12),LLV(LOW,2),1),LINETHICK2,COLORWHITE;
白色點多定位1:=L<做多 AND H>做多;
白色點空定位1:=H>做空 AND L<做空;
STICKLINE1(白色點多定位1=1,L,做多,3,0),COLORWHITE;?
STICKLINE1(白色點空定位1=1,H,做空,3,0),COLORWHITE;?
白色點多定位2:=H<做多;
白色點空定位2:=L>做空;
STICKLINE1(白色點多定位2=1,L,MIN(C,O),0.1,0),COLORWHITE;?
STICKLINE1(白色點多定位2=1,MAX(C,O),H,0.1,0),COLORWHITE;?
STICKLINE1(白色點多定位2=1,C,O,3,0),COLORWHITE;
STICKLINE1(白色點空定位2=1,L,MIN(C,O),0.1,0),COLORWHITE;?
STICKLINE1(白色點空定位2=1,MAX(C,O),H,0.1,0),COLORWHITE;?
STICKLINE1(白色點空定位2=1,C,O,3,0),COLORWHITE;
多頭紅色點:=今D>昨D;
空頭紅色點:=今D<昨D;
多頭紅色點定位1:=白色點多定位1=1 AND 多頭紅色點=1;
空頭紅色點定位1:=白色點空定位1=1 AND 空頭紅色點=1;
STICKLINE1(多頭紅色點定位1=1,L,做多,3,0),COLORMAGENTA;?
STICKLINE1(空頭紅色點定位1=1,H,做空,3,0),COLORMAGENTA;?
多頭紅色點定位2:=白色點多定位2=1 AND 多頭紅色點=1;
空頭紅色點定位2:=白色點空定位2=1 AND 空頭紅色點=1;
STICKLINE1(多頭紅色點定位2=1,L,MIN(C,O),0.1,0),COLORMAGENTA;?
STICKLINE1(多頭紅色點定位2=1,MAX(C,O),H,0.1,0),COLORMAGENTA;?
STICKLINE1(多頭紅色點定位2=1,C,O,3,0),COLORMAGENTA;
STICKLINE1(空頭紅色點定位2=1,L,MIN(C,O),0.1,0),COLORMAGENTA;?
STICKLINE1(多頭紅色點定位2=1,MAX(C,O),H,0.1,0),COLORMAGENTA;?
STICKLINE1(空頭紅色點定位2=1,C,O,3,0),COLORMAGENTA;
多頭多定位:=CROSS(做多,L) AND 多頭定位=1;
多頭平定位:=CROSS(H,做空) AND 多頭定位=1 AND 震蕩定位=0;
空頭空定位:=CROSS(H,做空) AND 空頭定位=1;
空頭平定位:=CROSS(做多,L) AND 空頭定位=1 AND 震蕩定位=0;
震蕩多定位:=CROSS(做多,L) AND 震蕩定位=1;
震蕩空定位:=CROSS(H,做空) AND 震蕩定位=1;

DRAWICON(多頭多定位=1 OR 震蕩多定位=1,多損,19);
DRAWICON(空頭空定位=1 OR 震蕩空定位=1,空損,20);
DRAWICON(空頭平定位=1,L,15);
DRAWICON(多頭平定位=1,H,15);
DRAWICON(多頭多定位=1 OR 震蕩多定位=1,L,5);
DRAWICON(空頭空定位=1 OR 震蕩空定位=1,H,6);
?
要符合圖片今日1分鐘螺紋 <!-- 咨詢內(nèi)容：

附件 :

-->

?

?來源:程序化99網(wǎng)（ www.tumamayizhan.com ）

博易技術人員： 短高H:=(20*H+19*REF(H,1)+18*REF(H,2)+17*REF(H,3)+16*REF(H,4)+15*REF(H,5)+14*REF(H,6)
+13*REF(H,7)+12*REF(H,8)+11*REF(H,9)+10*REF(H,10)+9*REF(H,11)+8*REF(H,12)
+7*REF(H,13)+6*REF(H,14)+5*REF(H,15)+4*REF(H,16)+3*REF(H,17)+2*REF(H,18)+
REF(H,20))/210,COLORBLUE,LINETHICK1;
短低L:=(20*L+19*REF(L,1)+18*REF(L,2)+17*REF(L,3)+16*REF(L,4)+15*REF(L,5)+14*REF(L,6)
+13*REF(L,7)+12*REF(L,8)+11*REF(L,9)+10*REF(L,10)+9*REF(L,11)+8*REF(L,12)
+7*REF(L,13)+6*REF(L,14)+5*REF(L,15)+4*REF(L,16)+3*REF(L,17)+2*REF(L,18)+
REF(L,20))/210,COLORBLUE,LINETHICK1;
D90H:=EMA(短高H,90),COLORRED,LINETHICK1;
D90L:=EMA(短低L,90),COLORRED,LINETHICK1;
D90差:=D90H-D90L;
D90頂:=D90H+D90差*2,COLORRED,LINETHICK1;
D90底:=D90L-D90差*2,COLORRED,LINETHICK1;
//XMA(X,N)=REFX(MA(X,N),N/2);
XH25:=REFX(MA(H,25),25/2);
XXH25:=REFX(MA(XH25,25),25/2);
XL25:=REFX(MA(L,25),25/2);
XXL25:=REFX(MA(XL25,25),25/2);
高0:=(XXH25-XXL25+XXH25),LINETHICK1,COLORWHITE;
低0:=XXL25*2-XXH25,LINETHICK1,COLORWHITE;
多頭定位:=低0>=D90底 AND 高0>=D90頂;
空頭定位:=高0<=D90頂 AND 低0<=D90底;
震蕩定位:=低0>=D90底 AND 高0<=D90頂;
XH60:=REFX(MA(H,60),60/2);
XXH60:=REFX(MA(XH60,60),60/2);
XL60:=REFX(MA(L,60),60/2);
XXL60:=REFX(MA(XL60,60),60/2);
波段頂0:=4*XXH60-3*XXL60,LINETHICK2,COLORGREEN;
波段底0:=4*XXL60-3*XXH60,LINETHICK2,COLORGREEN;
STICKLINE(多頭定位=1,高0,低0,15,0),COLOR000066;
//STICKLINE(空頭定位=1,高0,低0,5,0),COLOR003300;
STICKLINE(震蕩定位=1,高0,低0,15,0),COLOR555555;
STICKLINE(1=1,D90H,D90L,15,0),COLORGRAY;
多止損:=XXL25-(XXH25-XXL25)*3.5,CIRCLEDOT,COLORGREEN;
多止盈:(XXH25-XXL25)*1+XXH25,NODRAW,COLORWHITE;
空止損:=(XXH25-XXL25)*3.5+XXH25,CIRCLEDOT,COLORRED;
空止盈:XXL25-(XXH25-XXL25)*0.5,NODRAW,COLORWHITE;
做空:=(XXH25-XXL25)*1+XXH25,LINETHICK1,COLORWHITE;
做多:=XXL25-(XXH25-XXL25)*1,LINETHICK1,COLORWHITE;
空損:=(XXH25-XXL25)*3.9+XXH25,LINETHICK1,COLORYELLOW;
多損:=XXL25-(XXH25-XXL25)*3.9,LINETHICK1,COLORYELLOW;
波段頂:=(XXH60-XXL60)*3+XXH60,LINETHICK1,COLORRED;
波段底:=XXL60-(XXH60-XXL60)*3,LINETHICK1,COLORGREEN;
DRAWTEXT(ISLASTBAR,做空,'空'),COLORWHITE;
DRAWTEXT(ISLASTBAR,做多,'多'),COLORWHITE;
DRAWTEXT(ISLASTBAR,空損,'損'),COLORRED;
DRAWTEXT(ISLASTBAR,多損,'損'),COLORGREEN;

RSV:=(CLOSE-LLV(LOW,9))/(HHV(HIGH,9)-LLV(LOW,9))*100;
K:=SMA(RSV,3,1);
D:=SMA(K,3,1);
J:=3*K-2*D;
今D:=EMA(D,3);
昨D:=REF(今D,1);
STICKLINE(今D>=昨D,LOW,MIN(C,O),0.1,0),COLORRED;?
STICKLINE(今D>=昨D,MAX(C,O),HIGH,0.1,0),COLORRED;?
STICKLINE(今D>=昨D,CLOSE,OPEN,3,1),COLORRED;
STICKLINE(今D<=昨D,LOW,MIN(C,O),0.1,1),COLORGREEN;?
STICKLINE(今D<=昨D,MAX(C,O),HIGH,0.1,1),COLORGREEN;
STICKLINE(今D<=昨D,CLOSE,OPEN,3,1),COLORGREEN;
//多線:=DRAWLINE(HIGH>=HHV(HIGH,12),HIGH,LOW<=LLV(LOW,12),HHV(HIGH,2),1),LINETHICK2,COLORMAGENTA;
//空線:=DRAWLINE(LOW<=LLV(LOW,12),LOW,HIGH>=HHV(HIGH,12),LLV(LOW,2),1),LINETHICK2,COLORWHITE;
白色點多定位1:=L<做多 AND H>做多;
白色點空定位1:=H>做空 AND L<做空;
STICKLINE(白色點多定位1=1,L,做多,3,0),COLORWHITE;?
STICKLINE(白色點空定位1=1,H,做空,3,0),COLORWHITE;?
白色點多定位2:=H<做多;
白色點空定位2:=L>做空;
STICKLINE(白色點多定位2=1,L,MIN(C,O),0.1,0),COLORWHITE;?
STICKLINE(白色點多定位2=1,MAX(C,O),H,0.1,0),COLORWHITE;?
STICKLINE(白色點多定位2=1,C,O,3,0),COLORWHITE;
STICKLINE(白色點空定位2=1,L,MIN(C,O),0.1,0),COLORWHITE;?
STICKLINE(白色點空定位2=1,MAX(C,O),H,0.1,0),COLORWHITE;?
STICKLINE(白色點空定位2=1,C,O,3,0),COLORWHITE;
多頭紅色點:=今D>昨D;
空頭紅色點:=今D<昨D;
多頭紅色點定位1:=白色點多定位1=1 AND 多頭紅色點=1;
空頭紅色點定位1:=白色點空定位1=1 AND 空頭紅色點=1;
STICKLINE(多頭紅色點定位1=1,L,做多,3,0),COLORMAGENTA;?
STICKLINE(空頭紅色點定位1=1,H,做空,3,0),COLORMAGENTA;?
多頭紅色點定位2:=白色點多定位2=1 AND 多頭紅色點=1;
空頭紅色點定位2:=白色點空定位2=1 AND 空頭紅色點=1;
STICKLINE(多頭紅色點定位2=1,L,MIN(C,O),0.1,0),COLORMAGENTA;?
STICKLINE(多頭紅色點定位2=1,MAX(C,O),H,0.1,0),COLORMAGENTA;?
STICKLINE(多頭紅色點定位2=1,C,O,3,0),COLORMAGENTA;
STICKLINE(空頭紅色點定位2=1,L,MIN(C,O),0.1,0),COLORMAGENTA;?
STICKLINE(多頭紅色點定位2=1,MAX(C,O),H,0.1,0),COLORMAGENTA;?
STICKLINE(空頭紅色點定位2=1,C,O,3,0),COLORMAGENTA;
多頭多定位:=CROSS(做多,L) AND 多頭定位=1;
多頭平定位:=CROSS(H,做空) AND 多頭定位=1 AND 震蕩定位=0;
空頭空定位:=CROSS(H,做空) AND 空頭定位=1;
空頭平定位:=CROSS(做多,L) AND 空頭定位=1 AND 震蕩定位=0;
震蕩多定位:=CROSS(做多,L) AND 震蕩定位=1;
震蕩空定位:=CROSS(H,做空) AND 震蕩定位=1;

DRAWICON(多頭多定位=1 OR 震蕩多定位=1,多損,19);
DRAWICON(空頭空定位=1 OR 震蕩空定位=1,空損,20);
DRAWICON(空頭平定位=1,L,15);
DRAWICON(多頭平定位=1,H,15);
DRAWICON(多頭多定位=1 OR 震蕩多定位=1,L,5);
DRAWICON(空頭空定位=1 OR 震蕩空定位=1,H,6); 咋圖片不對啊 來源 程序化久久網(wǎng)