咨詢內容：

請老師把這公式改成新版本的因為能通過但是不顯示圖

DIFF:EMA(CLOSE,12)-EMA(CLOSE,26);
DEA:EMA(DIFF,9),LINETHICK1,COLORFFFF00; {QDIF:IF(DEA,DIF,0),COLORRED,LINETHICK2;}
QDIF:DIFF,COLORRED,LINETHICK2; D:=BACKSET(DIFF<REF(DIFF,1),2);
{RDIF:IF(D ,DIF,0),COLOR33FF33,LINETHICK2;}
PARTLINE(D,DIFF),COLOR33FF33,LINETHICK2;
MACD1:2*(DIFF-DEA),COLORRED,LINETHICK0;
MACD2:SMA(MACD1,0,3),COLORFFFF00,LINETHICK0;
STICKLINE(MACD1>MACD2 AND MACD1>0,0,MACD1,2,0),COLORRED;
STICKLINE(MACD1>MACD2 AND MACD1<0,0,MACD1,2,0),COLOR00FFFF;
STICKLINE(MACD1<MACD2,0,MACD1,1,0),COLOR40FF00;
S3:=BARSLAST(CROSS(DIFF,DEA));
L1:=(EMA(CLOSE,5) - EMA(CLOSE,13));
L2:=EMA(L1,13);
DIFIF1:=EMA(C,12)-EMA(C,26);
DEAEA1:=EMA(DIFIF1,9);
MACD0:=2*(DIFIF1-DEAEA1),STICK;
MACD:1*(DIFIF1-DEAEA1),COLORSTICK;
DIF:EMA(CLOSE,12)-EMA(CLOSE,26);
DEA0:EMA(DIF,9);
MACD3:(DIF-DEA)*2,COLORSTICK;
DRAWICON(CROSS(DIF,DEA),DIF,1);
DRAWICON(CROSS(DEA,DIF),DEA,2);
A1:=BARSLAST(REF(CROSS(DIFF,DEA),1));
底背離:=REF(CLOSE,A1+1)>CLOSE AND DIFF>REF(DIFF,A1+1) AND CROSS(DIFF,DEA);
STICKLINE(底背離,0,0.13,2,0),COLORYELLOW;
DRAWTEXT(底背離,0.1,' 底背離'),COLORYELLOW;
A2:=BARSLAST(REF(CROSS(DEA,DIFF),1));
頂背離:=REF(CLOSE,A2+1)<CLOSE AND REF(DIFF,A2+1)>DIFF AND CROSS(DEA,DIFF);
STICKLINE(頂背離,0,0.13,2,0),COLORYELLOW;
DRAWTEXT(頂背離,0.1,' 頂背離'),COLORYELLOW;
死叉:=CROSS(DEA,DIF);
N1:=BARSLAST(死叉);
N2:=REF(BARSLAST(死叉),N1+1);
N3:=REF(BARSLAST(死叉),N2+N1+2);
CL1:=LLV(C,N1+1);
DIFL1:=LLV(DIF,N1+1);
CL2:=REF(CL1,N1+1);
DIFL2:=REF(DIFL1,N1+1);
CL3:=REF(CL2,N1+1);
DIFL3:=REF(DIFL2,N1+1);
PDIFL2:=IF(DIFL2>0,INTPART(LOG(DIFL2))-1,INTPART(LOG(-DIFL2))-1);
MDIFL2:=INTPART(DIFL2/POW(10,PDIFL2));
PDIFL3:=IF(DIFL3>0,INTPART(LOG(DIFL3))-1,INTPART(LOG(-DIFL3))-1);
MDIFL3:=INTPART(DIFL3/POW(10,PDIFL3));
MDIFB2:=INTPART(DIF/POW(10,PDIFL2));
MDIFB3:=INTPART(DIF/POW(10,PDIFL3));
直接底背離:=(CL1<CL2 ) AND (MDIFB2>MDIFL2) AND (MACD<0 AND REF(MACD,1)<0) AND MDIFB2<=REF(MDIFB2,1);
隔峰底背離:=(CL1<CL3 AND CL3<CL2 ) AND (MDIFB3>MDIFL3) AND (MACD<0 AND REF(MACD,1)<0) AND MDIFB3<=REF(MDIFB3,1);
B:=(直接底背離 OR 隔峰底背離);
BG:=((MDIFB2>REF(MDIFB2,1))*REF(直接底背離,1)) OR ((MDIFB3>REF(MDIFB3,1))*REF(隔峰底背離,1));
底背離消失:=(REF(直接底背離,1) AND DIFL1<=DIFL2 ) OR (REF(隔峰底背離,1) AND DIFL1<=DIFL3);
DRAWTEXT(FILTER(BG,10),(DIF*1.5),'底部'),COLORYELLOW;
金叉:=CROSS(DIF,DEA);
M1:=BARSLAST(金叉);
M2:=REF(BARSLAST(金叉),M1+1);
M3:=REF(BARSLAST(金叉),M2+M1+2);
CH1:=HHV(C,M1+1);
DIFH1:=HHV(DIF,M1+1);
CH2:=REF(CH1,M1+1);
DIFH2:=REF(DIFH1,M1+1);
CH3:=REF(CH2,M1+1);
DIFH3:=REF(DIFH2,M1+1);
PDIFH2:=IF(DIFH2>0,INTPART(LOG(DIFH2))-1,INTPART(LOG(-DIFH2))-1);
MDIFH2:=INTPART(DIFH2/POW(10,PDIFH2));
PDIFH3:=IF(DIFH3>0,INTPART(LOG(DIFH3))-1,INTPART(LOG(-DIFH3))-1);
MDIFH3:=INTPART(DIFH3/POW(10,PDIFH3));
MDIFT2:=INTPART(DIF/POW(10,PDIFH2));
MDIFT3:=INTPART(DIF/POW(10,PDIFH3));
直接頂背離:=(CH1>CH2 ) AND (MDIFT2<MDIFH2) AND (MACD>0 AND REF(MACD,1)>0) AND MDIFT2>=REF(MDIFT2,1);
隔峰頂背離:=(CH1>CH3 AND CH3>CH2 ) AND (MDIFT3<MDIFH3) AND (MACD>0 AND REF(MACD,1)>0) AND MDIFT3>=REF(MDIFT3,1);
T:=(直接頂背離 OR 隔峰頂背離);
TG:=((MDIFT2<REF(MDIFT2,1))*REF(直接頂背離,1)) OR ((MDIFT3<REF(MDIFT3,1))*REF(隔峰頂背離,1));
頂背離消失:=(REF(直接頂背離,1) AND DIFH1>=DIFH2 ) OR (REF(隔峰頂背離,1) AND DIFH1>=DIFH3);
DRAWTEXT(FILTER(TG,20),(DIF*1.4),'頂部'),COLORMAGENTA;

?

?來源:程序化99網（ www.tumamayizhan.com ）

博易技術人員： 您好，您說不顯示，我換了幾臺機器測試了下都能正常顯示，這個可能和系統有關系，您換臺機器試試。 來源 程序化久久網