咨詢內容：

K線量能指標，在老版本中可以顯示，新版本中沒效果，請幫我改入，謝謝

HSL:=(V/MA(VOL,55));
STICKLINE( C>OPEN,C,O,HSL*2 ,1),COLORRED;
STICKLINE( C>OPEN,H,C,0.5 ,0),COLORRED;
STICKLINE( C>OPEN,O,L,0.1 ,0),COLORRED;
STICKLINE( C<OPEN,C,O,HSL*2 ,0),COLOR80FF80;
STICKLINE( C<OPEN,H,L,0.1 ,0),COLOR80FF80;
STICKLINE( C=OPEN AND C>REF(C,1),C,O,HSL*2 ,1),COLORRED;
STICKLINE( C=OPEN AND C>REF(C,1),H,L,0.1,0),COLORRED;
STICKLINE( C=OPEN AND C<REF(C,1),C,O,HSL*2 ,1),COLOR80FF80;;
STICKLINE( C=OPEN AND C<REF(C,1),H,L,0.1,0),COLOR80FF80;
STICKLINE( C=OPEN ,H,L,0.1,0),COLOR80FF80;
STICKLINE( C=OPEN ,C,O,HSL*2,0),COLOR80FF80;

?

?來源:程序化99網（ www.tumamayizhan.com ）

博易技術人員： 您好，我研究了下，是新版本這個函數有問題，不支持倒數第二個參數（控制寬度）使用變量畫K線，我已經提交開發修改。 HSL:=(V/MA(VOL,55));
STICKLINE(C>OPEN,C,O,HSL*2,1),COLORRED;
STICKLINE(C>OPEN,H,C,0.5,0),COLORRED;
STICKLINE(C>OPEN,O,L,0.5,0),COLORRED;
STICKLINE(C<OPEN,C,O,HSL*2,0),COLOR80FF80;
STICKLINE(C<OPEN,H,L,0.5,0),COLOR80FF80;
STICKLINE(C=OPENANDC>REF(C,1),C,O,HSL*2,1),COLORRED;
STICKLINE(C=OPENANDC>REF(C,1),H,L,0.5,0),COLORRED;
STICKLINE(C=OPENANDC<REF(C,1),C,O,HSL*2,1),COLOR80FF80;;
STICKLINE(C=OPENANDC<REF(C,1),H,L,0.5,0),COLOR80FF80;
STICKLINE(C=OPEN,H,L,0.5,0),COLOR80FF80; 來源 程序化久久網