這個程序編譯的時候通不過,不知道怎么轉換,請教了 [金字塔]
- 咨詢內容：
dim shanchushanchu = 0 ；
dim dangtianshuju ；
dim bili bili = 0.001 ；
dim xinheyuexinheyue = "IF88" ；
dim xinmingchengxinmingcheng = "IF等價K線"；
dim xinshichangxinshichang = "ZJ" ；
dim laoheyuelaoheyue = "IF00" ；
dim laoshichanglaoshichang = "ZJ"；
dim laozhishulaozhishu = "IF13" ；
Sub lishishuju() ；
cunzai = marketdata.IsExistStock(xinheyue,xinshichang) ；
if cunzai = 0 then
call
marketdata.AddStock(xinheyue,xinshichang,xinmingcheng) ；
application.MsgOut ；
else
application.MsgOut；
end if
set
Report1 = marketdata.GetReportData(laoheyue,laoshichang) ；
qj = Report1.Open*bili ；
if shanchu = 1
then
Set
History1 = marketdata.GetHistoryData(xinheyue,xinshichang,0)；
for j = 0 to History1.Count-1
History1.RemoveAt(j) ；
next
call
History1.InsertAt(0) ；
History1.open(0) = Report1.Open ；
History1.close(0) = Report1.Open ；
History1.high(0) = Report1.Open ；
History1.low(0) = Report1.Open ；
History1.Date(0) = Report1.Date ；
History1.Volume(0) = Report1.Volume ；
History1.OpenInt(0) = Report1.OpenInt ；
Call
History1.SaveData(xinheyue,xinshichang,1) ；
application.MsgOut ；"等價K線【歷史數據初始化】成功！"
end if
set
minutedata = marketdata.GetMinuteData(laoheyue,laoshichang) ；
Count = minutedata.Count ；
for i = 1 to count-1
Set
History2 = marketdata.GetHistoryData(xinheyue,xinshichang,0) ；
mxopen = History2.open(History2.Count-1)；
mxclose = History2.close(History2.Count-1)；
mxhigh = History2.high(History2.Count-1)；
mxlow = History2.low(History2.Count-1)；
mxDate = History2.Date(History2.Count-1)；
mxVolume = History2.Volume(History2.Count-1)；
mxOpenInt = History2.OpenInt(History2.Count-1)；
close = minutedata.newprice(i)；
fbDate = minutedata.Date(i)；
Volume = minutedata.Volume(i)；
mxVolume = minutedata.Volume(i-1)；
OpenInt = minutedata.OpenInt(i)；
if close > mxhigh
then
mxhigh = close；
end if
if close < mxlow
then
mxlow = close；
end if
mxdate = fbDate；
mxxVolume = (Volume-mxVolume)+mxxVolume；
mxOpenInt = OpenInt ；
History2.close(History2.Count-1) = close；
History2.high(History2.Count-1) = mxhigh；
History2.low(History2.Count-1) = mxlow ；
History2.Date(History2.Count-1) = mxdate；
History2.Volume(History2.Count-1) = mxxVolume；
History2.OpenInt(History2.Count-1) = mxOpenInt；
call
History2.SaveData(xinheyue,xinshichang,1)；
if abs(close-mxopen) > qj
then
call
History2.InsertAt(History2.Count) ；
History2.open(History2.Count-1) = close；
History2.close(History2.Count-1) = close；
History2.high(History2.Count-1) = close ；
History2.low(History2.Count-1) = close ；
History2.Date(History2.Count-1) = mxdate；
History2.Volume(History2.Count-1) = 0；
History2.OpenInt(History2.Count-1) = OpenInt；
call
History2.SaveData(xinheyue,xinshichang,1)；
mxxVolume = 0 ；
end if
next
End Sub
sub dengjiaK()；
call
lishishuju()；
end sub
Sub APPLICATION_VBAStart()；
call
Application.SetTimer(0,1000)；Sub APPLICATION_Timer(ID)；
if ID = 0
then
if (cdate(time)<=cdate("11:30:00") and cdate(time)>cdate("9:15:00")) or (cdate(time)<=cdate("15:15:00") and cdate(time)>cdate("13:00:00")) then '等價區間處理
set
Report1 = marketdata.GetReportData(laoheyue,laoshichang)；
qj = Report1.Open*bili；
set
Report2； = marketdata.GetReportData(laozhishu,laoshichang)；
Set
History2 = marketdata.GetHistoryData(xinheyue,xinshichang,0)；
mxopen = History2.open(History2.Count-1)；
mxclose = History2.close(History2.Count-1)；
mxhigh = History2.high(History2.Count-1)；
mxlow = History2.low(History2.Count-1)；
mxDate = History2.Date(History2.Count-1)；
mxxVolume = History2.Volume(History2.Count-1)；
mxOpenInt = History2.OpenInt(History2.Count-1)；
set
minutedata = marketdata.GetMinuteData(laoheyue,laoshichang)；
Count = minutedata.Count ；
close = minutedata.newprice(Count-1)；
fbDate = minutedata.Date(Count-1)；
mxVolume = minutedata.Volume(Count-2)；
Volume = minutedata.Volume(Count-1)；
OpenInt = minutedata.OpenInt(Count-1)；
if close > mxhigh
then
mxhigh = close ；
end if
if close < mxlow
then
mxlow = close ；
end if
mxdate = fbDate ；
mxxVolume = mxxVolume+(Volume-mxVolume)；
mxOpenInt =OpenInt' ；
application.MsgOut mxxVolume&" "&Volume&" "&Volume-mxVolume
History2.close(History2.Count-1) = close；
History2.high(History2.Count-1) = mxhigh ；
History2.low(History2.Count-1) = mxlow ；
History2.Date(History2.Count-1) = mxdate；
History2.Volume(History2.Count-1) = mxxVolume；
History2.OpenInt(History2.Count-1) = mxOpenInt ；
call
History2.SaveData(xinheyue,xinshichang,1) ；
if abs(close-mxopen) > qj
then
call
History2.InsertAt(History2.Count) ；
History2.open(History2.Count-1) = close；
History2.close(History2.Count-1) = close ；
History2.high(History2.Count-1) = close ；
History2.low(History2.Count-1) = close ；
History2.Date(History2.Count-1) = mxdate ；
History2.Volume(History2.Count-1) = 0 ；
History2.OpenInt(History2.Count-1) = OpenInt ；
call
History2.SaveData(xinheyue,xinshichang,1)；
mxxVolume = 0 ；
end if
call Application.ActivateFrameWithCode("Technic",xinheyue,xinshichang,0)；
call
Technic.Refresh；
end if
end if
end sub
Sub to_0()Set History = marketdata.GetHistoryData("IF88","ZJ",0)；
for i=0 to History.Count-1History
Volume(i) = 0；
next
call
History.SaveData("IF88","ZJ",1)；End Sub
dim shanchushanchu = 0 ；
dim dangtianshuju ；
dim bili bili = 0.001 ；
dim xinheyuexinheyue = "IF88" ；
dim xinmingchengxinmingcheng = "IF等價K線"；
dim xinshichangxinshichang = "ZJ" ；
dim laoheyuelaoheyue = "IF00" ；
dim laoshichanglaoshichang = "ZJ"；
dim laozhishulaozhishu = "IF13" ；
Sub lishishuju() ；
cunzai = marketdata.IsExistStock(xinheyue,xinshichang) ；
if cunzai = 0 then
call
marketdata.AddStock(xinheyue,xinshichang,xinmingcheng) ；
application.MsgOut ；
else
application.MsgOut；
end if
set
Report1 = marketdata.GetReportData(laoheyue,laoshichang) ；
qj = Report1.Open*bili ；
if shanchu = 1
then
Set
History1 = marketdata.GetHistoryData(xinheyue,xinshichang,0)；
for j = 0 to History1.Count-1
History1.RemoveAt(j) ；
next
call
History1.InsertAt(0) ；
History1.open(0) = Report1.Open ；
History1.close(0) = Report1.Open ；
History1.high(0) = Report1.Open ；
History1.low(0) = Report1.Open ；
History1.Date(0) = Report1.Date ；
History1.Volume(0) = Report1.Volume ；
History1.OpenInt(0) = Report1.OpenInt ；
Call
History1.SaveData(xinheyue,xinshichang,1) ；
application.MsgOut ；"等價K線【歷史數據初始化】成功！"
end if
set
minutedata = marketdata.GetMinuteData(laoheyue,laoshichang) ；
Count = minutedata.Count ；
for i = 1 to count-1
Set
History2 = marketdata.GetHistoryData(xinheyue,xinshichang,0) ；
mxopen = History2.open(History2.Count-1)；
mxclose = History2.close(History2.Count-1)；
mxhigh = History2.high(History2.Count-1)；
mxlow = History2.low(History2.Count-1)；
mxDate = History2.Date(History2.Count-1)；
mxVolume = History2.Volume(History2.Count-1)；
mxOpenInt = History2.OpenInt(History2.Count-1)；
close = minutedata.newprice(i)；
fbDate = minutedata.Date(i)；
Volume = minutedata.Volume(i)；
mxVolume = minutedata.Volume(i-1)；
OpenInt = minutedata.OpenInt(i)；
if close > mxhigh
then
mxhigh = close；
end if
if close < mxlow
then
mxlow = close；
end if
mxdate = fbDate；
mxxVolume = (Volume-mxVolume)+mxxVolume；
mxOpenInt = OpenInt ；
History2.close(History2.Count-1) = close；
History2.high(History2.Count-1) = mxhigh；
History2.low(History2.Count-1) = mxlow ；
History2.Date(History2.Count-1) = mxdate；
History2.Volume(History2.Count-1) = mxxVolume；
History2.OpenInt(History2.Count-1) = mxOpenInt；
call
History2.SaveData(xinheyue,xinshichang,1)；
if abs(close-mxopen) > qj
then
call
History2.InsertAt(History2.Count) ；
History2.open(History2.Count-1) = close；
History2.close(History2.Count-1) = close；
History2.high(History2.Count-1) = close ；
History2.low(History2.Count-1) = close ；
History2.Date(History2.Count-1) = mxdate；
History2.Volume(History2.Count-1) = 0；
History2.OpenInt(History2.Count-1) = OpenInt；
call
History2.SaveData(xinheyue,xinshichang,1)；
mxxVolume = 0 ；
end if
next
End Sub
sub dengjiaK()；
call
lishishuju()；
end sub
Sub APPLICATION_VBAStart()；
call
Application.SetTimer(0,1000)；
Sub APPLICATION_Timer(ID)；
if ID = 0
then
if (cdate(time)<=cdate("11:30:00") and cdate(time)>cdate("9:15:00")) or (cdate(time)<=cdate("15:15:00") and cdate(time)>cdate("13:00:00")) then '等價區間處理
set
Report1 = marketdata.GetReportData(laoheyue,laoshichang)；
qj = Report1.Open*bili；
set
Report2； = marketdata.GetReportData(laozhishu,laoshichang)；
Set
History2 = marketdata.GetHistoryData(xinheyue,xinshichang,0)；
mxopen = History2.open(History2.Count-1)；
mxclose = History2.close(History2.Count-1)；
mxhigh = History2.high(History2.Count-1)；
mxlow = History2.low(History2.Count-1)；
mxDate = History2.Date(History2.Count-1)；
mxxVolume = History2.Volume(History2.Count-1)；
mxOpenInt = History2.OpenInt(History2.Count-1)；
set
minutedata = marketdata.GetMinuteData(laoheyue,laoshichang)；
Count = minutedata.Count ；
close = minutedata.newprice(Count-1)；
fbDate = minutedata.Date(Count-1)；
mxVolume = minutedata.Volume(Count-2)；
Volume = minutedata.Volume(Count-1)；
OpenInt = minutedata.OpenInt(Count-1)；
if close > mxhigh
then
mxhigh = close ；
end if
if close < mxlow
then
mxlow = close ；
end if
mxdate = fbDate ；
mxxVolume = mxxVolume+(Volume-mxVolume)；
mxOpenInt =OpenInt' ；
application.MsgOut mxxVolume&" "&Volume&" "&Volume-mxVolume
History2.close(History2.Count-1) = close；
History2.high(History2.Count-1) = mxhigh ；
History2.low(History2.Count-1) = mxlow ；
History2.Date(History2.Count-1) = mxdate；
History2.Volume(History2.Count-1) = mxxVolume；
History2.OpenInt(History2.Count-1) = mxOpenInt ；
call
History2.SaveData(xinheyue,xinshichang,1) ；
if abs(close-mxopen) > qj
then
call
History2.InsertAt(History2.Count) ；
History2.open(History2.Count-1) = close；
History2.close(History2.Count-1) = close ；
History2.high(History2.Count-1) = close ；
History2.low(History2.Count-1) = close ；
History2.Date(History2.Count-1) = mxdate ；
History2.Volume(History2.Count-1) = 0 ；
History2.OpenInt(History2.Count-1) = OpenInt ；
call
History2.SaveData(xinheyue,xinshichang,1)；
mxxVolume = 0 ；
end if
call Application.ActivateFrameWithCode("Technic",xinheyue,xinshichang,0)；
call
Technic.Refresh；
end if
end if
end sub
Sub to_0()
Set History = marketdata.GetHistoryData("IF88","ZJ",0)；
for i=0 to History.Count-1History
Volume(i) = 0；
next
call
History.SaveData("IF88","ZJ",1)；
End Sub
- 金字塔客服：
http://www.weistock.com/bbs/dispbbs.asp?boardid=5&Id=69458 5樓
- 用戶回復：
主要看哪一部分，我昨天都打印出來了
- 網友回復： 這幾天都在看，還是不知道怎么轉換
有思路，想編寫各種指標公式，程序化交易模型，選股公式，預警公式的朋友
可聯系技術人員 QQ: 1145508240 進行 有償 編寫！（不貴！點擊查看價格！）
相關文章
-
沒有相關內容
會員登錄/注冊